Skip to content

Choose MeshCore hardware

Choose what the device will do, then confirm the exact board and firmware target in the official MeshCore flasher before buying.

Check before buying. Product revisions and firmware support change. Treat the linked devices as options to compare, not compatibility guarantees.

Choose a device type

Personal companion

Use this to send and receive messages. Most companions pair with a phone; some have their own screen and controls.

Choose a companion

Repeater

Use this to improve coverage. Plan the radio, power, antenna, enclosure, mount, and recovery as one system.

Plan a repeater

Antenna and cable

Match the radio band and connector before ordering. SMA and RP-SMA can look similar and are not interchangeable.

Choose an antenna

Room server

Use this to host a persistent room. Choose a supported board, continuous power, and a secure administration plan.

Set up a room server

Community build guides

These community-contributed designs are detailed build references, not default product recommendations. Read each guide's review status and safety notes before buying parts or starting work.

300 mW solar repeater

A draft RAK-based build for experienced builders, with a parts list, assembly stages, bench checks, and maintenance notes.

Review the 300 mW build

Experimental 1 W solar repeater

An unverified high-power design contributed by MrAlders0n. Use it only after electrical, RF, and site review confirms a real network need.

Review the experimental 1 W build

Before you buy

  • The exact model appears for the intended role in the current official MeshCore flasher.
  • The radio is a Canadian 902–928 MHz model.
  • The antenna, pigtail, and feed-line connectors match exactly. SMA and RP-SMA are not interchangeable.
  • The manufacturer supports the battery, charger, enclosure, and temperature range for the planned use.
  • You have a known-good data USB cable and a practical way to recover the device physically.
  • Current manufacturer documentation supports every specification that matters to the purchase.

Continue setup

After choosing a supported device, follow the matching setup guide:

Found an outdated product or compatibility detail? Share the correction and include the manufacturer source and date you checked it.